3-174
10. Before moving onto the ramps, make sure that the machine is
positioned in a straight line with the ramps and that the
centerline of the machine matches that of the trailer.
11. Align the direction of travel with the ramps and travel slowly.
When on the ramps, operate only the travel. Do not operate any
other lever.
12. When the machine travels over the rear wheels of the trailer, it
becomes unstable, drive slowly and carefully. Never operate
the steering.
13. At the moment the machine passes the rear wheels, it tilts
backward, be careful not to let the crane hit the trailer body,
Drive the machine backward to the specified position, then stop
the machine.
To Next Page
