4-64
[4] CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER
The fuel spray prevention 10 caps on the fuel
injection piping and both ends of the high-pressure
piping act to prevent the fuel from coming into
contact with high-pressure parts of the engine and
causing a fire if the fuel should leak or spray out.
Check visually and touch by hand to check that there
are no missing caps, loose bolts or hardening of the
rubber. If there are any problems, the parts must be
replaced. In this case, please ask us or our sales
service agency to carry out replacement.
To Next Page
