Maeda LC1385M-8BF - Page 376

6-36
7.2.1 DISPLAY FOR FLY-JIB MODE SWITCHING
1. Fly-jib angle at 0 degree:
When the Fly-jib tilt angle is set to 0 degree, the Rated total load display, Working radius display, Fly-jib
angle display and Lifting height display are switched to Fly-jib tilt angle 0 degree mode.
• The Fly-jib angle display indicates "0".
• The Rated total load display indicates the value for Fly-jib tilt angle 0 degree mode.
• Working radius display indicates the value for Fly-jib tilt angle 0 degree mode.
• Lifting height display indicates the value for Fly-jib tilt angle 0 degree mode.
2. Fly-jib angle at 20 degrees:
When the Fly-jib tilt angle is set to 20 degrees, the Rated total load display, Working radius display,
Fly-jib angle display and Lifting height display are switched to Fly-jib tilt angle 20 degrees mode.
• The Fly-jib angle display indicates "20".
• The Rated total load display indicates the value for Fly-jib tilt angle 20 degrees mode.
• Working radius display indicates the value for Fly-jib tilt angle 20 degrees mode.
• Lifting height display indicates the value for Fly-jib tilt angle 20 degrees mode.
3. Fly-jib angle at 40 degrees:
When the Fly-jib tilt angle is set to 40 degrees, the Rated total load display, Working radius display,
Fly-jib angle display and Lifting height display are switched to Fly-jib tilt angle 40 degrees mode.
• The Fly-jib angle display indicates "40".
• The Rated total load display indicates the value for Fly-jib tilt angle 40 degrees mode.
• Working radius display indicates the value for Fly-jib tilt angle 40 degrees mode.
• Lifting height display indicates the value for Fly-jib tilt angle 40 degrees mode.
4. Fly-jib angle at 60 degrees:
When the Fly-jib tilt angle is set to 60 degrees, the Rated total load display, Working radius display,
Fly-jib angle display and Lifting height display are switched to Fly-jib tilt angle 60 degrees mode.
• The Fly-jib angle display indicates "60".
• The Rated total load display indicates the value for Fly-jib tilt angle 60 degrees mode.
• Working radius display indicates the value for Fly-jib tilt angle 60 degrees mode.
• Lifting height display indicates the value for Fly-jib tilt angle 60 degrees mode.