Maeda LC1385M-8BF - Page 7

0-5
ITEM
Page
6. OTHER COMPONENTS
4-10
7. RECOMMENDED FUEL, COOLANT AND LUBRICANT
4-11
7.1 USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT
TEMPERATURES
4-11
8. TIGHTENING TORQUE SPECIFICATIONS
4-13
8.1 STANDARD TIGHTENING TORQUE LIST
4-13
9. INSPECTION AND MAINTENANCE LIST
4-14
10. MAINTENANCE PROCEDURES
4-16
10.1 CHECKING BEFORE OPERATION
4-16
10.2 IRREGULAR MAINTENANCE
4-17
10.3 MAINTENANCE EVERY 50 HOURS
4-35
10.4 MAINTENANCE EVERY 100 HOURS
4-37
10.5 MAINTENANCE EVERY 250 HOURS
4-38
10.6 MAINTENANCE EVERY 500 HOURS
4-44
10.7 MAINTENANCE EVERY 1000 HOURS
4-53
10.8 MAINTENANCE EVERY 2000 HOURS
4-60
10.9 MAINTENANCE EVERY 4000 HOURS
4-63
10.10 MAINTENANCE EVERY 5000 HOURS
4-65
10.11 MAINTENANCE EVERY 8000 HOURS
4-66
11. BLEEDING AIR FROM HYDRAULIC SYSTEM
4-67
12. METHOD FOR RELEASING PRESSURE IN HYDRAULIC CIRCUIT
4-71
SPECIFICATIONS
5- 1
1. SPECIFICATION LIST
5- 2
2. SPECIFICATION DIMENSIONAL DRAWING
5- 4
3. RATED TOTAL LOAD CHART
5- 5
4. WORKING RADIUS AND LIFTING HEIGHT
5- 8
FLY-JIB
6- 1
1. PRECAUTIONS OF FLY-JIB OPERATION
6- 2
2. SAFETY LABEL LOCATION
6- 4
3. WORKING RANGE CHART
6- 7
4. RATED TOTAL LOAD CHART
6- 8
5. FLY-JIB EACH SECTION
6- 9
6. FLY-JIB INSTALLATION AND STOWAGE
6-10
6.1 INSTALLATION OF FLY-JIB
6-11
6.2 CHANGING OF FLY-JIB TILT ANGLE
6-20
6.2.1 CHNAGING OF FLY-JIB TILT ANGLE
6-20
6.2.2 CHANGING OF FLY-JIB TILT ANGLE TO STOWAGE POSITION
6-22
6.3 EXTENDING AND RETRACTING NO.2 FLY-JIB
6-23
6.3.1 EXTENDING NO.2 FLY-JIB CONFIGURED 0 DEGRESS OR 20 DEGEREES
TILT ANGLE
6-23
6.3.2 EXTENDING NO.2 FLY-JIB CONFIGURED 40 DEGRESS OR 60 DEGEREES
TILT ANGLE
6-24
6.3.3 RETRACTING OF No.2 FLY-JIB
6-26
6.4 STOWAGE OF FLY-JIB
6-27
7. HANDLING MOMENT LIMITER
6-33
7.1 MOMENT LIMITER DISPLAY
6-33
7.2 MOMENT LIMITER FUNCTIONS
6-35