Magnetek IMPULSE VG+ Series 3 User Manual

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
5-81
Parameter
Code Display Function Range
Initial
Value
Access
Level
L4-03 Speed Agree Lvl ± Speed Agree Level ± -150.0–150.0 Hz 0.0 Adv
Sets the detection level for the desired frequency agree 2 and frequency detection 3 and 4 functions.
The set detection level is effective during either FWD or REV operation, depending on the set
detection level (positive value for FWD operation, negative value for REV operation).
Parameter
Code Display Function Range
Initial
Value
Access
Level
L4-04 Speed Agree Width ± Speed Agree Width ± 0.0–20.0 Hz 2.0 Adv
Sets the dectection width for frequency and desired frequency agree 2 and frequency detection 3
and 4 functions.

Magnetek IMPULSE VG+ Series 3 Specifications

General

Brand	Magnetek
Model	IMPULSE VG+ Series 3
Category	Controller
Language	English