Magnetek IMPULSE VG+ Series 3 User Manual

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
4-8
Parameter Modes
All parameters are organized under four modes:
Operation Mode
Drive operation is enabled. Drive status LED lights.
Programming Mode
Parameter access levels, control method, motion, speed control mode, and passwords are selected.
Parameters are set/read. Items to be set/read vary depending on the access level setting.
Auto-Tuning Mode
Motor parameters are automatically set by entering tuning data (motor nameplate values) when using
open loop vector control method.
Modified Constants Mode
Only parameters that have been changed from the factory settings are set/read.

Magnetek IMPULSE VG+ Series 3 Specifications

General

Brand	Magnetek
Model	IMPULSE VG+ Series 3
Category	Controller
Language	English