M&M
R
EFRIGERATION
I
NC
. 5-17
Chapter 5: Operational Procedures
Calibrate Sensors
The Calibrate Sensors menu allows the user to adjust the range of sensor inputs.
There are two types of calibration, Dynamic and Static. Dynamic calibration is used
primarily for accurate calibration of sensor inputs where the sensor is being compared
to known system conditions. Static calibration is performed to reset or restore sensor
calibration values after a hardware, software or factory configuration change.
Calibrate Sensors Screen
M & M REFRIGERATION 8:32
AM
1. START
CALIBRATE SENSORS
2. STATS
1.DYNAMIC
3. MODE
2.STATIC
4. SETPT
5. SCHED
6. CNTRL
7. MISC
8. LOGS
9. MENUS
To Next Page
Loading...
Need help?
General