M&M
R
EFRIGERATION
I
NC
. 3-39
Chapter 3: Operational Procedures
Oil Filter Pressure Setpoints
The Oil Filter Setpoints screen allows the operator to set an acceptable range for
the oil filter pressure as shown in the following example.
NOTE:
The displayed oil pressure is a computed value. The computation of this value is
different based on the compressor model. (see section on Oil Pressure Calcula-
tions for more detail.)
Oil Filter Pressure Setpoints Screen
The following table lists the data entry fields and a description of their purposes.
Oil Filter Pressure Setpoint Definitions
M & M REFRIGERATION 8:32
AM
1. START
OIL FLTR PRESS SETPTS
2. STATS
3. MODE
HIGH ALARM XXX.X
PSID
4.
SETPT
5. SCHED
6. CNTRL
7. MISC
8. LOGS
9. MENUS
TERM DEFINITION RANGE
HIGH ALARM
The CCS reports an alarm to the operator when the Oil Filter
Differential Pressure exceeds this value.
0 - 25
To Next Page
Loading...
Need help?
General