M&M RWB series User Manual

M&M R
EFRIGERATION
I
NC
. 3-21
Chapter 3: Operational Procedures
The following screen is an example of one of the possible momentary screens that may
appear after answering yes to the Start Confirmation screen. The possible momentary
screens will vary depending on the individual system configuration.
Start Momentary Screen
The following table lists possible momentary screens associated with the START hot key.
M & M REFRIGERATION 8:32
AM
1.
START
2. STATS
3. MODE STARTING
4. SETPT
5. SCHED MANUAL MODE
6. CNTRL
7. MISC
8. LOGS
9. MENUS
SCREEN FUNCTION
STARTING LOCAL MODE The compressor is starting in the Local mode.
STARTING MANUAL MODE The compressor is starting in the Manual mode.
STARTING AUTOMATIC MODE The compressor is starting in the Automatic mode.
ON-LINE REMOTE MODE
The compressor is on-line in the Remote mode and may start, depending
on the state of the Remote Start/Stop input.
ON-LINE AUTO-REMOTE
MODE
The compressor is on-line in the Auto-Remote mode and may start,
depending on the state of the Remote Start/Stop input.
ON-LINE SEQUENCED MODE
The compressor is on-line in the Sequenced mode and may start, depend-
ing on the master sequencer.
START DISABLED ALREADY
IN PROGRESS
The start function is disabled because the compressor is already in the
process of undergoing the start-up operation.
START DISABLED
SYSTEM IS RUNNING
The start function is disabled because the compressor is already running.
START DISABLED ANTI-
CYCLE XX:XX
The compressor is delayed from starting. An anti-cycle timer has been
activated which prevents start-up until the 20 minute time period has
expired (XX:XX is the time remaining). The screen will continue to be dis-
played until the timer expires or the user presses the QUIT key.
START DISABLED
SYSTEM ALARM/FAILURE
The start function is disabled due to a system alarm or failure.

M&M RWB series Specifications

General

Brand	M&M
Model	RWB series
Category	Controller
Language	English