Maintenance work on the superstructure
8.4 Fuel system
8 - 32 3 302 577 en Maintenance manual
GMK7450
16.08.2018
Changing filter 2 The filter 2 is mounted on the inner side of the engine and is accessible from
below.
• Place a receptacle under the filter (1).
• Remove the filter (1).
• Fill a new filter (1) with clean consumable
and screw it up (lightly grease the gasket).
Bleeding the fuel
line
A receptacle is under the end of the hose (1).
The lever (2) is parallel with the end of the
hose.
• Open the valve – lever (3) parallel to the line.
• Actuate the pump (4) until the consumable
flowing through the end of the hose (1) no
longer contains any bubbles.
To Next Page
Loading...
