Maintenance work on the carrier
7.8 Axle lines
7 - 60 3 302 577 en Maintenance manual
GMK7450
16.08.2018
7.8.5 Final drives – Changing the oil
Oil, spare parts,
tools
1)
Additional equipment (2nd axle line driven)
– Drain channel.
– Receptacle, approx. 5 l (1.5 gal);
à P. 2 - 4.
Prerequisites – The truck crane is raised on outriggers.
– The engine must not be running and must be secured against unauthor-
ised use;
à P. 2 - 3.
– The parking brake must be released.
Gear oil
in litres (gal)
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
for each final
drive:
2.7 (0.7)
C - LPF MIL-L 2105 B
API-GL-5
Viscosity:
Hyp SAE 90
ISO - VG 220
00552891
Fo
r drive Designation Quan-
tity
GROVE part no.
14 x 6 x 14 Gasket 24 x 29 Cu DIN 7603 6 00117145
14 x 8 x 14
1)
Gasket 24 x 29 Cu DIN 7603 8 00117145
O
Risk of environmental damage due to leaking consumables!
Always let consumables drain into suitable receptacles. Wipe up any con-
sumables that escape.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
To Next Page
Loading...
