Maintenance work on the carrier
7.13 Compressed air system
16.08.2018
Maintenance manual 3 302 577 en 7 - 85
GMK7450
7.13.3 Replacing the filter cartridge of the
compressed air drier
Spare parts and
tools
– Strap wrench.
Prerequisites – The truck crane must be raised on outriggers or parked over an inspection
pit.
– The
engine must not be running and must be secured against unauthor-
ised use;
à P. 2 - 3.
Changing the filter
cartridge
• Using the valve (1), bleed all the air from the
reservoir (2).
• Replace the filter cartridge (3) using the
strap wrench (lubricate gasket slightly).
Designation Quantity GROVE part no.
Filter cartridge 1 04156032
G
Risk of injury from escaping compressed air!
If the reservoir (2) is not completely vented, the
compressed air drier will be
under pressure.
Bleed the reservoir until air no longer escapes from the valve.
To Next Page
Loading...
Need help?
General
