Maintenance work on the superstructure
8.6 Hoists
8 - 48 3 302 577 en Maintenance manual
GMK7450
16.08.2018
8.6.6 Having a partial inspection carried out
Only suitably trained specialists should carry out a partial inspection of
– the multiple-disc brake,
– the plug connections between the hydraulic motor and the multiple-disk
brake,
–
the plug connections between the multiple-disk brake and transmission
unit
and be permitted to replace parts with signs of wear.
8.6.7 Having a general inspection carried out
H
When carrying out the general inspection of the hoists, also observe the
information contained in
Measures required for winch monitoring, p. 5 - 21.
The general inspection involves removing the transmission and sending it
to the manufacturer to be examine
d.
H
For transmissions that have undergone a general overhaul, an oil change
must be carried out after 200 and 1,000 operating hours;
à Run-in regula-
tions
, P. 4 - 1.
To Next Page
Loading...
