Manitowoc GROVE GMK7450 - Checking for Leaks

Maintenance work on the carrier
7.13 Compressed air system
7 - 84 3 302 577 en Maintenance manual
GMK7450
16.08.2018
7.13.2 Checking for leaks
•
Start up the compressed air system.
• Check for any possible leaks in the compressed air system (connections,
pipes, hose lines and valves).
If damage cannot be rectified immediately or further damage is likely:
• Notify Manitowoc Crane Care or an authorised GROVE dealer or your repair
crew.
W
G
Risk of accidents due to escaping compressed air!
Never tighten connections when the system is under pressure. Only change
gaskets, pipes and hose lines when the
system is depressurised.