Manitowoc GROVE GMK7450 - Changing the Oil and Oil Filter

Maintenance work on the carrier
7.3 Engine
16.08.2018
Maintenance manual 3 302 577 en 7 - 17
GMK7450
7.3.6 Changing the oil and oil filter
Oil, spare parts,
tools
– Receptacle, approx. 60 l (16 gal);
à P. 2 - 4.
Prerequisites
• Find out the prescribed oil specifications and about the need to shorten
the maintenance interval under special operating conditions;
à Engine
manufacturer’s documentation
.
• Find out about the safety instructions and the sequence of steps to change
the oil and the oil filter;
à Engine manufacturer’s documentation.
– The truck crane must be level.
– The engine must not be running and must be secured against unauthor-
ised use;
à P. 2 - 3.
Changing
s
M 6
Engine oil
in litres (gal)
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
53 (14.0) HD - CD CES 20081
Cummins
SAE 15 W-40
04162428
Designation Quantity GROVE part no.
Oil filter 1 04
241344
O ring on the drain plug 1 04241329
O
Risk of environmental damage due to leaking consumables!
Always let consumables drain into suitable recept
acles. Wipe up any con-
sumables that escape.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.