Manitowoc GROVE GMK7450 User Manual

Maintenance work on the superstructure
8.12 Hoist ropes
16.08.2018
Maintenance manual 3 302 577 en 8 - 99
GMK7450
8.12.3 Lubricating the hoist rope
Grease, spare
parts and tools
– brush, roller, spray gun, tray or pressure pump.
Lubricating the
rope
–
lubricating the rope
– significantly prolongs its service life and
– keeps the friction between the rope, the sheaves and the hoist drum as
low as possible.
The lubricant is applied to the rope by
– spraying, brushing, rolling or
– by running it through a tray filled with lubricant or
– by means of high-pressure lubrication with a pressure pump.
H
Manitowoc Crane Group Germany GmbH recommends high-pressure
lubrication with a pressure pump (GROVE part no. 90018525) for reasons of
sustainability, efficiency and environmental protection.
When lubricating the hoist ropes, observe the instructions concerning the
lubricant.
When us
ing the pressure pump, observe the manufacturer's separate oper-
ating instructions.
For further information, contact
Manitowoc Crane Care or an authorised
GROVE dealer.
M 3
Designation Quantity GROVE part no.
Grease 1 03133770

Manitowoc GROVE GMK7450 Specifications

General

Brand	Manitowoc
Model	GROVE GMK7450
Category	Construction Equipment
Language	English