Manitowoc Grove TMS9000-2 Series - Page 119

Grove Published 02-21-2019, Control # 611-05 3-55
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
3
Table 3-1. Alarm Characteristics
Note that the audible alarm can be canceled. By pressing the
Tab button on the display. Refer to item 1 in (Figure 3-51). It
can only be canceled once the boom is no longer being
moved. When boom motion again becomes apparent in the
control system, the audible alarm will be restored.
LIMITATION POSITION ALARM
Height Limitation 3 m (10 ft) before limit Slow beeping
1.5 m (5 ft) before limit Fast beeping
At limit Solid sound
Boom Up/Down 10 deg before limit Slow beeping
5 deg before limit Fast beeping
At limit Solid sound
Radius 3 m (10 ft) before limit Slow beeping
1.5 m (5 ft) before limit Fast beeping
At limit Solid sound
Swing 10 deg before limit Slow beeping
5 deg before limit Fast beeping
At limit Solid sound
Virtual wall 3 m (10 ft) before limit Slow beeping
1.5 m (5 ft) before limit Fast beeping
At limit Solid sound
FIGURE 3-51
9072
1
2