OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-56 Published 02-21-2019, Control # 611-05
When a limit is reached, the Main Screen shows an indicator
for this condition (again in addition to audible alarms).
(Figure 3-50) shows the Main Screen example.
Setting WRL Limitations
There is a separate display screen to allow for enabling and
setting limitations for the WRL options. The WRL limitations
are shown as a group on the main menu screen, each
limitation can then be selected to work with that limitation
screen. (Figure 3-52) shows the WRL options on the main
menu screen.
WRL Overall height menu
The overall height menu, which is a subset of the RCL menu,
allows the operator to set a limit for the maximum boom
height.
Item Description
1 Tab Button
2 OK Button
FIGURE 3-52
9049-1
Operating Display menu with WRL sub-menu highlighted
To Next Page
Loading...
