Manitowoc Grove TMS9000-2 Series - Page 200

OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-136 Published 02-21-2019, Control # 611-05
4. Once writing reaches 100% remove the USB drive and
plug it into a laptop computer, the following files will have
been created:
- CibDataLogger.sqlite
- DataLoggerReportGenerator.sfx.exe
- cib.xml
5. If running the data logger report program for the first
time, select DataLoggerReportGenerator.sfx.exe and
follow the setup screens to install the report generator. If
the data logger report generator has been previously
installed or after installing the report generator, select
CibDataLogger.sqlite to generate the report.
6. Choose the time span for the report (Figure 3-209), the
default is the maximum amount of time possible. After
the report is generated the disk save icon (1) will be
highlighted.
7. Select the save icon and choose the directory to save
the report to (Figure 3-210).
8. Open Microsoft Excel and import the.csv file(s) into it.
There will be at least one file and possibly an additional
fault codes file.
9. Open the cib.xml file to see all the possible loggable
items and their descriptions.
GPL licensing screen
This screen (Figure 3-211) displays the license information
for the open source software used to create the RDM and
ODM interfaces.
Exiting the menu
Press button (1, (Figure 3-212))on the jog dial or (2) on the
control panel.
FIGURE 3-208
9129-2
FIGURE 3-209
9129-3
1
FIGURE 3-210
9129-4
FIGURE 3-211
9131