Manitowoc Grove TMS9000-2 Series User Manual

4-51
TMS9000-2 OPERATOR MANUAL OPERATING PROCEDURES
4
Published 02-21-2019, Control # 611-05
GROVE
The current lattice extension angle
- Lifting/lowering lattice extension: Shows the
current lattice extension angle (1, Figure 4-68) in
relation to the main boom in degrees.
- Lattice extension, can be angled: Shows the
angle of the lattice extension corresponding to the
RCL code in degrees (1, Figure 4-68).
If the displayed RCL code does not apply to a lattice
extension, nothing will be displayed.
The current lattice extension length
Shows the current lattice extension length (2, Figure 4-68) in
meters (m) or feet (ft).
The counterweight
Shows the counterweight (1, Figure 4-70) in tonnes (t).
The current swing angle
Shows the angle(1, Figure 4-70) of the current
superstructure position.
0° means that the superstructure is slewed to the rear.
A full turn from this working position is divided into two semi-
circles (Figure 4-71).
Angles in the left semi-circle are displayed as positive values
(0° to 180.0°),
Angles in the right semicircle will be shown as negative (0° to
-179.9°).
8882-8
FIGURE 4-67
FIGURE 4-68
1
8882-28a
2
1
8882-28b
FIGURE 4-69
1
1
9082-1b
FIGURE 4-70
1
2
8849-62
FIGURE 4-71

Manitowoc Grove TMS9000-2 Series Specifications

General

Brand	Manitowoc
Model	Grove TMS9000-2 Series
Category	Construction Equipment
Language	English