Manitowoc Grove TMS9000-2 Series - Page 272

OPERATING PROCEDURES TMS9000-2 OPERATOR MANUAL
4-62
Published 02-21-2019, Control # 611-05
3. Unlocking the telescopic section
(A, Figure 4-112) – The telescoping cylinder extends until the
locking pins (7) are clear.
(B) – The mechanism (10) retracts the locking pins (7) – the
telescopic section is unlocked.
4. Telescoping, locking and setting down a telescopic
section
The telescoping cylinder pushes the telescopic section to a
locking point.
The weight is taken off the mechanism (10, Figure 4-113).
The locking pins (7) extend into the cutouts (4).
The telescopic section is automatically set down.
The telescoping cylinder retracts until the locking pins (7,
Figure 4-114) are positioned on the above telescopic section
(1).
The weight of the load is now on the telescopic sections and
not on the telescoping cylinder.
8849-118
FIGURE 4-111
8849-119
FIGURE 4-112
8849-120
FIGURE 4-113
8849-121
FIGURE 4-114