Manitowoc Grove TMS9000-2 Series - Page 421

GROVE 6-85
TMS9000-2 OPERATOR MANUAL SET-UP AND INSTALLATION
6
Published 02-21-2019, Control # 611-05
15. Using the handle, fold up the upper deflection sheave
and secure with the pin. Secure the pin with the retaining
clip.
16. Using the hand hold, fold the front sheave out
(Figure 6-178).
17. Secure the sheave with the pin (1, Figure 6-179).
Secure the pin with the retaining clip.
18. As required, rig main hoist or optional auxiliary hoist
cable for single through four part line.
19. Install the anti-two block switch (1, Figure 6-180) on the
pin and secure with the retaining clip (2).
20. Connect anti-two block cable:
a. Attach anti-two block cable to the junction box.
b. Route the cable from the junction box to the junction
box on the boom nose and connect the plug.
9139-4
FIGURE 6-177
5
4
1
3
2
9139-5
FIGURE 6-178
9139-6
FIGURE 6-179
1
9139-7
FIGURE 6-180
2
1