AUTOMATIC TRANSAXLE
ROAD TEST
Warning
• When performing a road test, be aware of other vehicles, people, impediments, etc. to avoid an
accident.
Note
• When the legal speed limit must be exceeded, use a chassis dynamomenter instead of performing a road
test.
Road Test Preparation
1. Inspect the engine coolant levels. (See Section E.)
2. Inspect the engine oil levels. (See Section D.)
3. Inspect the ATF levels. (See K2-28 AUTOMATIC TRANSAXLE FLUID(ATF) INSPECTION, ATF Level
Inspection.)
4. Inspect the IG timing. (See F1-21 IGNITION TIMING INSPECTION.)
5. Inspect the idle speed. (See F1-23 IDLE SPEED INSPECTION.)
Shift Diagram
D range (normal mode)
TCC o p e r a t io n a v a il a b l e
VEHICLE SPEED km/h {mph}
K2-24
To Next Page
