EXTERIOR ATTACHMENT, DASHBOARD AND CONSOLE
EXTERIOR ATTACHMENT
DASHBOARD AND CONSOLE
RADIATOR GRILLE REMOVAL/INSTALLATION
1. Remove the upper seal board.
2. Remove the fasteners and screws.
3. Pull the radiator grille forward, then disengage
clips A from the front bumper.
SCREW
C U P A
4. Install in the reverse order of removal.
CONSOLE REMOVAL/INSTALLATION
1. Shift the selector lever to L range.(ATX)
2. Remove the selector lever knob. (ATX)
3. Remove the shift knob.(MTX)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Adjust the console. (See S-24 CONSOLE
ADJUSTMENT.)
TYPE 1
S-23
To Next Page
