TROUBLESHOOTING
STEP INSPECTION ACTION
5 CONFIRM THAT MALFUNCTION
SYMPTOMS DO NOT REOCCUR AFTER
REPAIR
• Connect all SAS unit connectors.
• Connect driver- and passenger-side pre-
tensioner seat belt connectors.
• Connect driver- and passenger-side side
air bag module connectors. (With side air
bag)
• Connect passenger-side air bag module
connector.
Yes
Complete troubleshooting, then explain repairs to cus
tomer.
• Connect clock spring connector.
• Connect TNS relay connector.
• Connect negative battery cable.
• Attach child restraint seat built in resonator
to passenger-side seat.
• Turn headlight switch off.
• Turn ignition switch to ON position.
• Does passenger-side air bag cut-off
indicator light illuminate for approximately
6 seconds and then stay on without
dimming?
No
Recheck malfunction symptoms, then repeat from Step
1 if malfunction recurs.
T-112
To Next Page
