Introduction
3
1
McCormick Technical
Documentation
McCormick tractors are being constantly improved.
Technical changes introduced since this Operators
Manual went into print are therefore not taken into
consideration.
Additional manuals are available from your Dealer
for the operation, service and repair of your tractor.
For prompt convenient service, contact your Dealer
for assistance in obtaining the manuals for your
tractor.
Your Dealer can expedite your order for Operators
Manuals, Parts Catalogues, Service Manuals etc.
Always give the tractor Name, Model and P.l.N.
(product identification number) or S.N. (serial
number) of your tractor so your Dealer can provide
the correct manuals for your tractor.
Manual Storage
Keep the Operators Manual stored in the manual
storage compartment equipped on this tractor.
MI03G05
Make sure this manual is complete and in good
condition.
IMPORTANT: This operators manual is part of
your tractor. If the tractor is sold, loaned or
rented, the operators manual MUST go with it.
Units of Measurement
All units of measurement used in this manual are
metric unless otherwise stated. Use the following
table to convert from metric to imperial units.
There is a large selection of McCormick
tractor models available for vastly differing
applications. This is a worldwide Operators
Manual and therefore may include some
information, illustrations and photographs
which may differ to the standard equipment
and accessories on your tractor.
mm x 0.03937 = inches
kg x 2.2 = pounds (lb)
Bar x 14.5038 = PSI
Litres x 0.22 = Imperial Gallons
Litres x 0.264 = U.S Gallons
N (Newtons) x 0.225 = lbf
Nm x 0.738 = lb. ft
Nm x 8.85 = lb. in
° C x 1.8 (=32) = ° F
km/h x 0.62 = MPH
To Next Page
Loading...
