Safety Precautions
26
ROLL OVER PROTECTIVE STRUCTURE (ROPS)
Your tractor is equipped with a Roll Over Protective
Structure (ROPS) cab. Seat belts (if equipped and
permitted by local regulations) are a part of your
protective system and must be worn at all times.
Carefully follow all instructions to get all the safety
advantages of the equipment provided.
Tractor Roll Over
ROPS is a special safety unit. The ROPS must be
replaced with a new ROPS if damaged, to ensure
you will get the same protection.
The ROPS, the operators seat, the seat belt (if
equipped) and all the mounting accessories and
wiring inside the operators protective system must
be carefully checked if a ROPS cab is damaged,
and all damaged parts must be replaced with new
parts immediately.
DO NOT TRY TO MAKE REPAIRS OR WELD A
ROPS.
ROPS Safety Rules
Do not make modifications to the ROPS.
Example; welding an accessory to the ROPS, or
drilling a hole in the ROPS. Special fasteners are
used to install the operator protective parts.
Replacement parts must be the same as given in
the Parts Catalog for your tractor.
ROPS Plate
DI96M016
Each ROPS is equipped with a ROPS Plate. The
plate shows the ROPS serial number and
applicable standards. See page 3. for location.
WARNING: Securely fasten your seat belt
(if equipped). Your tractor is equipped with
a ROPS cab for your protection. The seat
belt can help ensure your safety if it is used
and maintained. Never wear a seat belt
loose or with slack in the belt system.
Never wear the belt in a twisted condition
or pinched between the seat structural
members.
To Next Page
Loading...
