Safety Precautions
9
2
A Message to the Operator
It is YOUR responsibility to read and comply with
all safety instructions quoted in this Operators
Manual.
Understand that your safety and the safety of other
persons is measured by how you operate, and
service this tractor. Know the positions and
operations of all controls before you try to operate.
MAKE SURE YOU CHECK ALL CONTROLS IN A
SAFE AREA BEFORE STARTING YOUR WORK.
READ THIS MANUAL COMPLETELY and make
sure you understand the controls. All equipment has
a limit. Make sure you understand the speed,
brakes, steering, stability, and load characteristics of
this tractor before you start to operate.
MH04F085
The safety information given in this manual does
not replace safety codes, insurance needs, federal,
state and local laws. Make sure your tractor has the
correct equipment needed by the local laws and
regulations.
McCormick Tractors International Limited are
continuing to work for your safety: by making
tractors with better protection and by giving these
rules for safe operation.
Intended Use
This McCormick tractor is designed solely for use in
customary agricultural or similar operation
(intended use).
Use in any other way is considered as contrary to
the intended use. The manufacturer accepts no
liability for any damage or injury resulting from this
misuse and these risks must be born solely by the
user.
Compliance with and strict adherence to the
conditions of operation, service and repair as
specified by the manufacturer also constitutes
essential elements for the intended use.
This McCormick tractor should be operated,
serviced and repaired only by persons familiar with
all its particular characteristics and acquainted with
the relevant safety rules (accident prevention).
The accident prevention regulations, all other
generally recognized regulations on safety and
occupational medicine and the road traffic
regulations must be observed at all times.
Any arbitrary modifications carried out on the
tractor will relieve the manufacturer of all liability for
any resulting damage or injury.
The "Operators Manual
Symbol", is intended to direct
the operator to the Operators
Manual for correct information
with regard to operation,
maintenance/adjustments etc.
When you see this symbol on
any particular part of the tractor
refer to this Operators Manual.
To Next Page
Loading...
