Routine Maintenance
201
7
INTERIM SERVICE
(0 to 250 Hours)
Some servicing must be carried out which is outside the regular service intervals. These tasks are listed
below.
After any wheel/axle adjustments
The first 30 minutes of operation (then every 10 Hours of operation thereafter,
until the torque has stabilized):
- Check the torque of ALL Front and Rear Wheel Bolts/Nuts, see pages 176 and 184 for correct torques.
After the first 20 Hours of PTO operation
- Change Front PTO oil, see page 214 for correct procedure.
After the first 50 Hours of operation
- Check tension of Drive Belts, see page 216 for correct procedure.
After the first 250 Hours of operation
- Carry out a First 250 Hour Service (After Delivery Service). This is a detail list of checks/tasks that
must be carried out by your dealer after the first 250 hours of operation.
See your dealer for more information.
To Next Page
Loading...
