Safety Precautions
14
Highway/Public Road Operation
● Comply with road traffic laws, including any
speed restrictions and the correct use of
Hazard Warning Lamps and SMV Symbol.
● Connect the brake pedals together with the
brake pedal interlock. This will ensure uniform
braking and maximum stopping ability.
● Check clearance before going under electric
power lines, bridges etc.
Tractor Warning Lamp Usage
North American Tractors
●
The flashing amber warning lamps must be
used according to road traffic laws.
The flashing amber warning lamps must be used
when operating the tractor on the road during the
day or night. A vehicle operator that comes near the
tractor must see an SMV symbol and the tail lamps
from the rear and the flashing amber warning lamps
from the front and rear.
RD96N011
Amber Warning Lamps Operation
The amber warning lamps operate as follows, when
the main lamp switch is turned to the first and
second positions clockwise.
MH04M074
FIRST POSITION (1) - ALL the amber warning
lamps will flash ON and OFF.
SECOND POSITION (2) - ALL the amber warning
lamps will flash ON and OFF. Tail lamps and
headlamps will be illuminated.
When the direction turn signal switch is used, the
amber warning lamps will operate as follows:
MH04M075
1. When indicating to turn right, the Right amber
warning lamp will flash ON and OFF and the
Left amber warning lamp will illuminate but
will not flash.
2. When indicating to turn left, the Left amber
warning lamp will flash ON and OFF and the
Right amber warning lamp will illuminate but
will not flash.
IMPORTANT: When towing an implement or wagon
with the tractor, the complete rear area warning
system (amber warning lamps, red tail lamps and
SMV symbol) must be easily seen by any vehicle
operator coming near the tractor.
!
1. AMBER WARNING LAMP AND TURN SIGNAL LAMP
(LEFT SIDE)
2. AMBER WARNING LAMP AND TURN SIGNAL LAMP
(RIGHT SIDE)
3. TAIL LAMP (RIGHT SIDE)
4. TAIL LAMP (LEFT SIDE)
5. SLOW MOVING VEHICLE (SMV) SYMBOL
21
34
5
2
1
1
2
To Next Page
Loading...
