Operation
143
5
Ride Control OFF
DS98K261
Ride Control will be disabled if:
A. The switch is in the OFF position.
B. The hitch UP/DOWN switch is in the down
position.
C. The travel speed is below 0.8 km/h (0.5 mph).
Upper Limit Setting Override
This position can be used to raise the hitch above
the upper limit setting until the hitch stops upward
movement.
Tractors equipped with Auto Hitch:
The Ride Control switch in this position will take the
load off the hitch locking latches thus improving the
latching/unlatching of the auto hitch.
DS98K259
Press and hold the Ride Control Switch in the fully
forward position until the hitch stops upward
movement.
See page 107 for full Auto Hitch operating
instructions.
To Next Page
Loading...
