EasyManua.ls Logo

MCCORMICK MTX Series - Page 243

MCCORMICK MTX Series
295 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routine Maintenance
235
7
Hoses and Wiring
Check all hoses for damage and leakage. Check
the hose clamps are tight,
correct torque = 3.4 Nm.
Check all wiring for damage. If damage is found
see your Dealer for replacement of parts or
refrigerant.
Viscous Fan Drive
DP98E262
During cleaning and maintenance of the engine
and radiator, be careful not to cause damage to
the viscous fan drive.
DO NOT use steam or high pressure jets to clean
the drive.
DO NOT restrict the fan blade rotation during
engine operation.
DO NOT remove the bi-metal coil (1) on the front
of the drive.
Check the fan and drive for external damage or
erratic operation. See your dealer if service is
required.
Clean the Operators Seat
Before removing stains, use a vacuum cleaner to
remove loose dirt.
Find what type and how old the stains are. Some
stains can be removed with water or soap
solution.
CLEANER FLUID - This type of cleaner can be
used for grease or oil stains, follow manufactures
instructions.
FOAM CLEANER: This type of cleaner is good
for all stains, follow manufactures instructions.
NOTE: Do not make the material wet or clean with
a hard brush. Clean with a damp cloth only.
Immediately after the material is clean, dry the
material with dry cloth.
Seat Belt Inspection and
Maintenance (If Equipped)
Keep sharp edges and items that can cause
damage, away from the belt.
From time to time, check belt, buckles and
mounting bolts for damage.
Replace all parts that are worn or damaged.
Replace a belt that has cuts that can weaken
the belt.
Check that the bolts are tight on the seat
bracket.
Keep seat belt clean and dry.
Clean belt only with a soap solution and warm
water.
Do not use bleach or dye on the belt because
this can make the belt weak.
GENERAL MAINTENANCE
1
WARNING: Never use petroleum spirit,
naptha or any other volatile material for any
cleaning purposes. These materials may
be toxic and/or flammable.
WARNING: Securely fasten your seat belt.
Your tractor is equipped with a ROPS cab
or frame for your protection. The seat belt
can help insure your safety if it is used and
maintained. Never wear a seat belt loosely
or with slack in the belt system. Never wear
the belt in a twisted condition or pinched
between the seat structural members.
!
!

Table of Contents

Related product manuals