Operation
88
Engine Coolant Heat Maintainer
(If Equipped)
The heater element is installed in the engine block
and will keep the engine coolant at a warm
temperature for improved cold temperature starting.
North American Tractors (120 Volts):
MD05G009
Connect a mains supply to the connector plug (1),
located directly on the engine block.
NOTE: Use a heavy duty three wire extension
cord if required.
Rest or World Tractors (220/240 Volts):
DD98M118
Connect a mains supply to the connector plug (2),
located next to the RH step.
NOTE: Use a heavy duty three wire extension
cord if required.
Transmission Oil Heat Maintainer
(Dealer Option)
Depending upon market, your dealer may be able
to offer a transmission oil heater for your tractor.
The heater will keep the transmission oil warm
for improved cold temperature starting.
See your dealer for more information.
Engine Oil Pan Heat Maintainer
(Dealer Option)
Depending upon market, your dealer may be able
to offer an engine oil pan heater for your tractor
The heater will keep the engine oil warm for
improved cold temperature starting.
See your dealer for more information.
NOTE: The heater is installed in the RH side of
the oil pan and has a rating of 300 watts at
120 volts. Connect the heater to a 120 volt AC
grounded outlet. Use a heavy duty three wire
extension cord if required.
Fuel Heat Maintainer
(Dealer Option)
Depending upon market, your dealer may be able
to offer an fuel heater for your tractor The heater
will keep the fuel warm for improved cold
temperature starting.
See your dealer for more information.
1
2
To Next Page
Loading...
