www.mdcusa.com
Ph: 1-833-632-8721
©Copyri ght
Service Schedule
• Check hitch bolts to 66ft-lbs/90Nm.
• Lubricate with high temperature bearing grease.
•
Inspect and adjust handbrake.
• Inspect and adjust brakes. The check bearings are well greased, and the crown
nut is correctly tightened.
• Inspect condition and torque to 92ft-lbs/125Nm (⅟
2
″ studs).
(103ft-lbs/140Nm 14mm studs alloy rims) (148ft-lbs/200Nm 14mm studs steel
rims).
•
Inspect for abnormal wear, damage, and pressure.
•
Ensure no loose fittings.
• Check all seals on doors and hatches compress 30-50%. All seals are in
serviceable condition and free of damage.
• Grease bushes and check for play.
•
Check torque on suspension hanger bolts (140ft-lbs/190Nm).
• Check retaining chain shackles tight.
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________