118
30. Registering AV Devices
FBAS:
Connection of a VHS video recorder,
analogue Sat receiver, decoder, cam-
corder, photos etc. via a Scart or
EURO AV cable or via a Cinch cable
or a Hosiden cable.
For devices with higher picture quali-
ty (e.g. DVD players, Blu-Ray play-
ers, game consoles), the following
applies:
YC:
Better quality through separation of
brightness and colour information
(SVHS/Hi8 video recorder) when
connecting a VHS video recorder,
analogue Sat receiver, decoder etc.
via a Scart or EURO AV cable or a
Hosiden cable
RGB:
Signal type with three video basic
colours – Red, green, blue. Is usually
needed to control a screen.
YUV
High-quality video signal (video com-
ponents); consists of brightness (Y)
and the two colour difference signals
(U and V) and is transmitted using
three lines.
HDMI:
Using this interface, digital picture
and sound signals are transmitted
over a line with very high bandwidth
(suitable for HDTV).
Fully-wired SCART or Euro AV cableHDMI-cable Cinch-cable
DVI-A /DVI-D:
With a DVI interface, you can choose
between DVI-A (analogue, PC with
VGA interface) and DVI-D (digital,
PC with DVI interface).
• If you want, press the numeric key
and specify another name for this AV
device and then press the OK button..
• Use the cursor control key to select
“Connect” and press the OK button.
Connect the AV device to the respective
EURO socket.
• Press the “EXIT“ key to close the TV
menu.
DVI-cable
To Next Page
Loading...
