34
Opening the menu
11. General Picture Settings
Setting
Zoom/Panorama
Some of the menu items are not available
in a 2 ** menu.
The picture settings zoom, vertical position, auto-
matic zoom and panoramacan be set and saved
as general settings for all program positions.
Setting the zoom/panorama mode:
• Press the key.
The TV menu appears on the screen.
• Press the blue key . The menu
“Picture and sound“ and the
menu item “General picture
settings“ are pre-selected.
• Use the cursor control key
to select the menu item
“Brightness“.
• Press the corresponding
numeric key to select
“Zoom/Panorama“.
• Use the cursor control key to
select the desired menu
items.
• Use the V-/V+ key to
change the settings for
“Zoom/Panorama“.
• Press the key to save the new settings.
The picture shows the factory settings.
• Press the key to close the TV menu.
The functions “Panorama“ and “Zoom“
can be combined with each other.
☞
☞
Zoom value 0 Panorama Yes
Picture pos., vert. 0% Pan. mode
Non-linear
Automatic zoom off
Picture profile selection
Zoom/Panorama
Noise reduction
3)
Picture sharpness
Colour impr.
Colour intensity
Power options
Contrast
Brightness
Picture-Volume
Picture profile adjustmen
)
Sound set,.prog.posn
Sound settings, gen.
Pict.set.,prog.posn.
Picture settings, gen.
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
3) See glossary for an explanation.
EXIT
MENU
To Next Page
Loading...
