66
Opening the menu
If you wish to record a program which your video
recorder or DVD recorder cannot receive directly
because it does not have a suitable tuner (such as
DVB-T or DVB-C), you can use the “Timer over-
view“ to make such programs available to the
recording device.
Setting a timer manually for a recording:
• Press the key. If you press briefly,
the function programmed for (see Sec-
tion 18. “Programming the function keys“) is
executed.
If you hold down for about two seconds,
all possible selections are displayed.
• If all possible selections are displayed, press the
corresponding numeric key (in the example: )
to open the timer menu.
• If a timer already exists, press the key.
• The cursor is located at the left of the first line
“Record“. The number of subjects and sections
depends on the selected scope of operation.
Depending on the configura-
tion of the TV set, the various
menu items may be display-
ed in a different order and
numbered differently.
Use the V-/V+ key to set this
menu item to “Yes“.
• If desired, press cursor
control key and use the
V-/V+ key to activate the
reminder function. If the
reminder function is active,
a reminder window is dis-
played on the screen one
minute before the start time
programmed for the timer.
•
Use the numeric keys to select the program posi-
tion (see the station table of the TV set) which is to
16. Special Functions
Recording a program with a timer
To Next Page
Loading...
