Metz Axio pro - Manual Search

93
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the key to open the TV menu.
• Press the red key to open the menu
“Configuration“.
• Use the corresponding numeric key (in the
example: ) to select “DVB-C“.
• Make a selection with the assigned numeric key,
in the example  “Manual search”.
• The cursor is on “Channel”.
• Enter the channel number or
special channel number or
frequency in the setting win-
dow with the numeric keys.
If additional data of a pro-
gram is known, then select
the corresponding menu
items “Modulation” and
“Symbol rate” and change
the setting using the — +
key or with the numeric
keys.
• Select “Start program search” with the cursor
control button in the setting window.
• Press key and confirm the question about
the station search with the corresponding nume-
ric key:
 free-to-air programs
3)
 all programs
3)
 free + CICAM programs
3)
.
After pressing the corresponding numeric key
the program search begins.
20.3 Setting Stations
Manual DVB-C station search
2)
Opening the menu
Channel 05 Cable channel --
Frequency 64.500MHz Symbol rate 6900
Madulation Auto.mode Start station search
General settings
Manual search
Automatic search
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
2)
Country
Language
Operating
Configuration
F1
➔
2) Possible only on sets equipped with this function.
3) See glossary for an explanation.
MENU

