Metz Axio pro - DVB-T, Antenna Suply Voltage

89
With this menu item, you switch the supply voltage
for a DVB-T antenna on or off.
On: The antenna supply voltage is constantly on
(Select this setting if you have a TV-Set with
two DVB-T-Tuners but only one active antenna
or if you receive also analog stations via the
active antenna).
Switched: The antenna supply
voltage is only
active for DVB-T-
programs
(e.g. for controlling
a relay to switch
between DVB-T-
antenna and bro-
adband cable, if
they coexist).
Off: For a passive antenna or
a community antenna
Setting the antenna supply
voltage
• Press the key to open the TV menu.
• Press the red key to open the “Configura-
tion“ menu.
• Use the corresponding numeric key (in the
example: ) to select the function “DVB-T“.
• Press the key and, in the setting window,
use the V-/V+ key to select the antenna supply
voltage.
• Press the key to save the new settings.
• Press the key to close the TV menu.
20.2 Setting Stations
DVB-T, Antenna supply voltage
2)
Opening the menu
Supply voltage off
General settings
Manual search
Automatic search
Antenna
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
2)
Country
Language
Operating
Configuration
F1
➔
2) Possible only on sets equipped with this function.
EXIT
MENU
