58
15.2 Recording Control
Application example:
You wish to record a program received via DVB-T.
The program starts at 22:45 hours, ends at 23:40
hours and is broadcast on ITV.
Set up a “manual timer“ as described in Section
16, “Special Functions 2“ or set a timer with the
aid of the EPG as described in Section 18.3
“Using EPG, Recording a Program“.
Set the lead time to 3 minutes and the overrun
time to 10 minutes.
At the programmed start time minus the pro-
grammed lead time of three minutes, the TV set is
either:
- switched on from the standby state (red LED
lights) with the program position for ITV selected,
whereby the screen remains dark but the pro-
gram is sent via the EURO socket to your recor-
der, or
- In the case of TV sets with a receiver (tuner): If
you are already watching television, the pro-
gram will be switched to SAT 1 if recording
requires this setting..
At the programmed end of the recording (at
23:40 hours) the program position for ITV
remains selected for the programmed overrun time
of 10 minutes.
It is not possible to switch to another pro-
gram position during the programmed lead
and overrun times.
☞
To Next Page
Loading...
