36
Opening the menu
11.2 Picture Settings for
Program via Station Table
Individual picture settings for
a program position:
• Select the program position whose picture set-
tings you wish to change.
• Press the key.
The TV menu appears on the screen.
• Press the white key . The station table is
displayed with the currently active program
position highlighted.
• Press the key to
enable editing of the station
table.
• Press the cursor control key
to move to the subject
side.
• Use the corresponding
numeric keys (in this exam-
ple:
for the picture quali-
ty) to select the desired
menu items.
• In the setting window, use
the cursor control key to
select the desired function.
• Use the V-/V+ key to change the setting.
“gen.“ means here that the new setting will
overwrite the related general picture setting (see
page 28).
The individual settings made here which
differ from the general settings remain
saved.
• Press the key to save the new settings.
• Press the key to close the TV menu.
☞
Picture sharpness gen. Noise reduction gen.
Colour offset 0
VCR off
Sound corrections
Colour standard
3)7)
Picture quality
Picture correct.
Enter logo
Station contained in EPG
CA module
5)
Signal quality
5)
DVB-prog. info
5)
Frequency/channel
7)
0010 Hessen 3
0009 Südwest
0008 MDR
0007 PRO 7
0006 RTL 2
0005 RTL
0004 SAT 1
0003 Bayern 3
0002 ZDF
0001 ARD
Station table
✗
F1
➔
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
5) Available only for DVB stations!
7) Available only for analogue stations
MENU
F2
EXIT
To Next Page
Loading...
