Metz Axio pro - Automatic Program Change; AV Playback

21
Opening the menu
AV playback
(devices with switching voltage)
Before they can be used, AV devices must
be registered and assigned to the appropri-
ate input sockets in the menu “AV devices“.
Playing back a recording from a video cassette, DVD,
etc. on a connected AV device is called AV playback.
In order to see the picture, you must program your
TV set to execute an automatic
program change at the EURO
socket to which the AV device
is connected.
Programming a program
change
This menu item is not
available in a 2 ** menu
(see Section 27,
Scope of Operation).
The automatic program
change is set in the fac-
tory to “ON“ for all
EURO sockets.
• Press the key.
The TV menu appears on the screen.
• Press the red key . The menu
“Configuration“ is displayed.
• Use the corresponding numeric key
(in this example:

) to select the menu item
“EURO sockets“.
• Use the cursor control key to select “EURO 1 or
“EURO 2
2)
“.
• Press the key and then, in the setting win-
dow, use the V-/V+ key to select “Program
change on“.
• Press the key to save the new setting.
• Press the key to close the TV menu.
☞
☞
☞
10. AV Playback
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2)
Possible only on sets equipped with this function.
Change stations on
EURO 2
2)
EURO 1
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
2)
Country
Language
Operating
Configuration
F1
➔
MENU
EXIT