128
• Use the cursor control key to select the line
“Recording device“.
If only one such device exists, it is then display-
ed. If further recording devices exist, you can
select the desired device with the aid of
the V-/V+ key.
• Press the key to save the settings.
• On the playback device (in this example, the
DVD player) start the film which is to be copied.
• On the recording device (in this example, the
video recorder), select the AV program position
(in most cases AV1).
• On the recording device, start a direct recor-
ding by pressing the appropriate button (REC or
OTR, etc.).
The TV set is now set up so that the signal coming
from the playback device is connected directly to
the recording device.
31.
Copying between AV Devices
Direct recording
To Next Page
Loading...
