Microscan QX-830 - Page 311

QX-830 Compact Industrial Scanner User’s Manual A-23
Appendices
EtherNet/IP Data Type
Symbol Data Output, EtherNet/IP
Extra Symbol Information, EtherNet/IP
Diagnostic Output, EtherNet/IP
External Source Processing Mode, EtherNet/IP
Preamble
Preamble Status
Preamble Characters
Postamble
Postamble Status
Serial Cmd: <K136,symbol data output,extra symbol information,diagnostic output,
external source processing mode>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K136,symbol data output,extra symbol information,diagnostic output,
external source processing mode>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K136,symbol data output,extra symbol information,diagnostic output,
external source processing mode>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K136,symbol data output,extra symbol information,diagnostic output,
external source processing mode>
Default: 1 = Command
Options: 0 = Disabled 1 = Command 2 = Data
Serial Cmd: <K141,status,preamble character(s)>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K141,status,preamble character(s)>
Default: CR (0x0D)
Options: 1 – 4 ASCII characters
Serial Cmd: <K142,status,postamble character(s)>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled