Microscan QX-830 - Page 330

A-42 QX-830 Compact Industrial Scanner User’s Manual
Serial Commands
UPC/EAN
EAN Status
Supplementals Status (UPC/EAN)
Separator Status (UPC/EAN)
Separator Character (UPC/EAN)
Supplemental Type (UPC/EAN)
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: 3 = Both Standard and Edge-to-Edge
Options: 0 = Disabled
1 = Standard
2 = Edge-to-Edge
3 = Both Standard and Edge-to-Edge
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled 2 = Required
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: , (comma)
Options: Any 7-bit ASCII character
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: 0 = Both
Options: 0 = Both 1 = 2 characters only 2 = 5 characters only