Microscan QX-830 - Page 341

QX-830 Compact Industrial Scanner User’s Manual A-53
Appendices
Read Duration Output Separator
No Read Message
No Read Message Status
No Read Message
Bad Symbol Message
Bad Symbol Message Status
Bad Symbol Message
No Symbol Message
No Symbol Message Status
No Symbol Message
Serial Cmd: <K706,status,separator>
Default: Space (0x20)
Options: Any 7-bit ASCII character
Serial Cmd: <K714,No Read message status,No Read message>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K714,no read message status,No Read message>
Default: NOREAD
Options: Any valid ASCII string up to 128 characters
Serial Cmd: <K715,bad symbol message status,message>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K715,bad symbol message status,message>
Default: BAD_SYMBOL
Options: Any valid ASCII string up to 128 characters
Serial Cmd: <K716,no symbol message status,message>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K716,no symbol message status,message>
Default: NO_SYMBOL
Options: Any valid ASCII string up to 128 characters