Microscan QX-830 - Page 345

QX-830 Compact Industrial Scanner User’s Manual A-57
Appendices
Trend Analysis Output 1
Trend Analysis Mode
Trigger Evaluation Period
Number to Output On
Decodes per Trigger Threshold
Trend Analysis Output 2
Trend Analysis Output 3
Diagnostics Output 1
High Temperature
Serial Cmd:
< K780,trend analysis mode ,trigger evaluation period,number to output on,
decodes per trigger threshold>
Default: 1 = No Read
Options: 0 = Mismatch
1 = No Read
2 = Decodes per Trigger
3 = Bad Symbol
4 = No Symbol
Serial Cmd:
< K780, trend analysis mode, trigger evaluation period ,number to output on,
decodes per trigger threshold>
Default: 0
Options: 0 to 255
Serial Cmd:
< K780, trend analysis mode,trigger evaluation period, number to output on ,
decodes per trigger threshold>
Default: 0
Options: 0 to 255
Serial Cmd:
< K780, trend analysis mode,trigger evaluation period,number to output on,
decodes per trigger threshold >
Default: 0
Options: 0 to 65535
Serial Cmd:
< K781, trend analysis mode,trigger evaluation period,number to output on>
Serial Cmd: < K782, trend analysis mode,trigger evaluation period,number to output on>
Serial Cmd: < K790,high temperature ,service unit,unused,laser current high,laser current
low,low temperature>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled