Microscan QX-830 - Page 351

QX-830 Compact Industrial Scanner User’s Manual A-63
Appendices
Diagnostics
High Temperature Threshold
Message
Low Temperature Threshold
Message
Counts (Read-only)
Power-On
Resets
High Temperature Threshold <K402,status,message>
Low Temperature Threshold <K403,status,message>
Counts (Read-only)
<K406> (returns: power-on,resets,
power-on saves,custom default
saves)
Hours Since Reset (Read-only) <K407> (returns: hours,minutes)
Service Message <K409,status,service message, threshold,resolution>
Laser Current Warning Message
<K411,laser high status,laser high message,laser low status,
laser low message>
User-Defined Name <K412,user-defined name>
Serial Cmd: <K402,status,message>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K402,status,message>
Default: HIGH_TEMP
Options: Any valid ASCII string up to 128 characters
Serial Cmd: <K403,status,message>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K403,status,message>
Default: LOW_TEMP
Options: Any valid ASCII string up to 128 characters
Serial Cmd: <K406,power-on,resets,power-on saves,power-on flash saves>
16-bit counter that increments on scanner power-on.
Serial Cmd: <K406,power-on,resets,power-on saves,power-on flash saves>
16-bit counter that increments on scanner reset. Value is reset on power-on.