Ink and other liquids used with this machine
12
Ink and other liquids used with this
machine
Precautions regarding ink are indicated on the Ink bottle. Read these carefully and make sure you
understand the contents before using the product.
• Take steps to prevent leakage into natural water systems or domestic wastewater. Some
constituents are toxic to aquatic life.
• Be sure to read the Safety Data Sheet (SDS) before handling.
https://mimaki.com/supply/sds/
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
• Do not subject Ink bottle to strong shocks or violent shaking. Do not attempt to refill the ink.
Leaking ink may adhere to the skin or get into your eyes or mouth.
• Do not disassemble Ink bottle. Leaking ink may adhere to the skin or get into your eyes or
mouth.
• Do not store in places accessible to children.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
• Do not use ink, maintenance cleaning solution, or other liquids used with this machine with other
printers. Disregarding this precaution may result in damage to the printer.
• Avoid touching or soiling the PCB contact area of the ink IC chip. Doing so may damage the
PCB.
• Store in a low place no higher than 1 m above the floor. Dropping this machine may result in
splashing ink, washing liquid, or other liquid.
• Store in sealed containers.
• Store in a cool and dark place.
(1) When moving ink from cold to warm locations, allow to stand for at least three hours in the location where it will be
used. Note that using thawed ink will affect printing quality due to ink deterioration. Store ink in an environment
where it will not freeze.
(2) Open the ink before use and use up as quickly as possible. Print quality may degrade if the bottles are left open for
extended periods.
To Next Page
Loading...
Need help?
General
