MIMAKI UCJV300 Series - Attaching New Media Holder and Media Cutter Replacement Procedure

Chapter 6 Maintenance
153
5
Attach the sliders to the new media holder.
• Engage the holes in the sliders on to the lugs on the media holder.
6
Insert the new media holder into the platen.
7
Attach the media holder stopper.
8
Close the maintenance covers.
Media Cutter Replacement
Replace cutters when blades are chipped or blunt.
• Do not touch the cutter blade. Disregarding this precaution may result in injury.
• Do not store in places accessible to children.
1
In LOCAL mode, select [MENU] > [CUTTING], then press the [ENTER] key.
• The Cutting menu is displayed.
6